Description

BLACK SERIALS is a new cutting tools selected from this competitive cutting industryes. Every design have their unique application and it's used to cut most tyep of hard and abrasive materials, cutting high grade concrete product, stone and all tyep of ceramic tiles.

Description

VACUUM BRAZED DIAMOND BLADES are manufactured by welding synthetic diamond particles to the outside edge of the circular saw blade in a vacuum brazing furnace. All of the diamond particles are on the exterior cutting edge of the blade, with no bond-diamond segments like other blades. Vacuum brazed blades will usually cut a wide variety of materials including concrete, masonry, steel, various irons, plastic, tile, wood and glass. They are also used to cut rail lines. The Fire Brigade, and other Emergency Services, will use them on ''rescue'' saw, so they are often called rescue blades.They perform well in dry applications, but the blade will last longer if water is used with them.

Description

AKODA produce several types of diamond tools to help in diamond industries. Neither ''CUT to GRIND'' nor ''TUCK to CRACK'' which help to deliver the most valuable to any project application, in order to meet the requirement of construction industries.

Description

ASPHALT CUTTING BLADE are used for cutting asphalt roadways and asphalt over concrete driveways. It’s different from the other cutting structures such as bricks, concrete, stones etc. ASPHALT CUTTING BLADE are ideal for cutting abrasive materials with faster, smoother performance and longevity life spend where water is use as lubricant for cooling purpose.

Description

AKODA CRACK CHASER BLADE 4'' diameter with 10mm width segment V-SHAPE is specially engineered to efficiently clean out and grooving and repair random crack in cure concrete, asphalt and other building materials especially crack driveway and sidewalk. It's also used for decorative scoring and joint widen in masonry. AKODA TUCK POINT BLADE 4” & 14” diameter with thick segment is special design for mortar removal, grout repair or cleaning of concrete application. It’s commonly used by general masonry or tuck point contractor as tuck pointing in mortar joint and the preparation of masonry surfaces including paver and block. It’s also design for wiring and sensor installation where hacking is no more needed.

Description

Suitable For Grinding Tile, Ceramic, Granite, Mable and Stone Materials.

Description

Suitable For Grinding & Cutting Glass, Tile, Granite, Marble & All Stone Materials.

Description

AKODA FLAP WHEEL is a new grinding tools selected from this competitive grinding industries. Every design have their unique application and it’s used to grind most type of hard and abrasive materials, grinding high grade concrete product, stone and all types of ceramic tiles.

Description

AKODA DIAMOND CUP WHEEL is engineered for a wide range of application, including uniquely designed spiral turbo styled cup wheel for faster grinding. made with quality diamond cup grinders are made with only the finest quality diamonds for maximum grind value.
 

Description

Description

The diamond wire saw cutter differs from others, such as the bandsaw, by using Abrasion instead of saw teeth. Thanks to the hardness of diamonds, the abrasion Technique can be used to cut through almost any material that is softer than the Diamond abrasive. The process also produces less kerf and wasted materials when compared with conventional solid blades. The wire cutter also allows circular Cutting on all sides, preventing the wire from getting pinched and is therefore an Effective method of resisting compressive forces while cutting a wide range of Materials.

Application For Aluminium, Copper, PVC And Non-Ferrous Metals.

Description

TUNGSTEN CARBIDE TIPPED circular saw blade.
Application For Hard Wood Or Soft Wood.

Description

Special For Concrete And Reinforced Concrete.
Application For : Hard Brick, Stone, Reinforce Concrete
 

Application :

Description

GERMAN DIN TECHNOLOGY STANDARD

Description

GERMAN DIN TECHNOLOGY STANDARD

4 cutter head for reinforced concrete and minimise carbide cracks. Design carbide reduce jamming while drilling. Double flute spiral for excellent dust transportation. The most fundamental difference between SDS Plus and SDS Max lies in terms of size. SDS Plus bits are generally thinner and smaller than SDS Max bits. Here are the numbers: SDS Plus shanks have a diameter of 10 millimeters; SDS Max shanks have a diameter of 18 millimeters. Thinner SDS Plus is generally for lighter duty work-mostly for dr illing smaller holes; SDS Max is for heavier duty work--for drilling larger holes. Product inaccordance with the Germany DIN technology standard.

STAR bull point and chisel always keep sharper and sare time for the STAR POINT design.

Description

Features

-Superhard alloy with high intensity and good wear resis.
-The drilling speed is faster than ordinary drill more than 7 times, drilling smooth, stable and no burr.
-The universal shank is mainly applicable for NITTO and Chinese magnetic drill machines.

3-PLY Cutters:

1.OUTER CUTTING EDGE
2.INTERMEDIATE CUTTING EDGE
3.INNER CUTTING EDGE

Instruction

-Use machine rotary hammer SDS PLUS hammer drill more than 900 watt.
-Surer that the machine is in the drilling function do not work with hammer drill function, it will damage the bit.
-Use the machine at speed between 380-2500 rpm. For harder materials and larger core diameters, use a lower rpm. Higher speeds do not always improve performance.

Description

1 PIECE TYPE CONTRUCTION CORE BIT are cutting tools used to remove a cylindrically shaped piece of material, called a core. Core bits have a hollow center, similar to hole saws, but differ in application. A hole saw is meant to create a large hole in a workpiece, while a core drill is designed to cut a hole and remove a core sample or to drill a hole without leaving material behind. Diamond core bits have diamond cutting tips and are frequently used for drilling in materials such as asphalt, cured concrete, reinforced concrete, green concrete.

FEATURES

1.Efficient Cutting
-Save time of changing cutting wheel improve cutting efficiency 3 times
2.Cutting Section
-It ensures clean cutting with no burrs or discoloring
3.High Cutting Precision
-Much higher cutting precision than the tradition metal cutting saws, a perfect replacement
4.Cutting non-dusting
-Cutting non-dusting, health and eco-friendly cutting with only mental scrap
5.Motor Life
-Motor life is 10 times longer than the traditional cutting machine

Description

The Akoda table tile saw offers a number of features that allow for precise cuts and ensure a great quality finished product. The adjustable cutting head allows you to adjust the head for a number of different tiles and you can even adjust the head to allow for cutting 3 ½ bricks as well. This saw has a cutting length of up to 700mm and will allow the weekend warrior to accomplish any tile cutting task.

Description 

-Working time +50%
-Vibration frequency +50%
-Imported wear-resistant materials
-High quality bearing and oil seals dreduse noise

Description

Hand held, electric-powered concrete vibrator is a truly portable one man operation, remote concrete construction site, it is ideal as an emergency stand by vibrator in case of power failure or small scale construction.

Features:

-For clean. Tidy operation and less cleaning work afterwards.
-Easy to use: simply connect to a dust extractor.
-Tool-independent: functions with all drilling tools.
-No assembly on the machine required-no additional weight on the machine.
-Suitable for core cutters up to 127mm in diameter.
-Also very suitable for dust extraction during wet drilling.

Description

Special for Demolition Hammer akoda tools grease is quality grease special designed to deliver outstanding lubrication and protection. This grease provides excellent and is suitable for use in demolition hammer- akaido, bosch, makita, hikoki and many others.

-High temperature resistant
-Outstanding lubrication
-Excellent part protection

Description

- For clean tidy operation and less cleaning work afterwards
- Easy to use, simply connect to a dust extractor
- Tool-independent, functions with all drilling tools
- No assembly on the machine required - no additional weight on the machine
- Suitable for core cutters up to 127mm in diameter
- Also, very suitable for dust extraction during wet drilling
 

Description

-Parallet & Angled cuts
-Cuts uo to 16mm thick.
-6 linear ball bearing.
-Aluminium base-Lightweight & Durable.
-Aluminium lateral legs support large tiles.
-Use 22 x 5 x 6mm tatinium coated cutting wheel.

Description

Power Trowel is designed to smooth the concrete floor. Small hole and slight high spots can be leveled off by the action of the trowel. Trowel blades are the first component of a power trowel that will require replacement. Floating Plan/ Floating Blades removes hump (high spots) and fills in valley (low spot). Finishing Blade use to produces a slab that is dense, durable and smooth. In many instances contrators will burnish the slab causing it to have a mirror-like appearance.

Description

-Specially designed, hardened aluminium blade, ensuring a smoother finish than conventional screeds.
-Heavy rubber mounts to reduce the vibration level on the handle.
-The rounded ends of the blade make it easy to go around obstacles.
-The tile-up stand keeps the engine out of concrete of off the ground when not in use.
-Emergency stop switch available.
-Easy changed blades.

Description

-Tamping plate is made of high quality steel for maximum durability.
-High performance.
-Specially designed handle with anti vibration rubber mounted to reduce operator fatigue.
-Direct drive from engine, powerful, stable in usage.

Description

-Portable handle, foldable handle easy to transportation and storage.
-The front turn-up base is convenient for approaching the corner.
-Open plate design reduces dirt buiding.
-Centrally mounted fully enclose exciter for an even spread of compactly force over the whole base plate.
-Heavy-duty shock mounts reduce vibiration to the upper engine and handle.

Description

AKODA FLOOR SAW is a powerful petro-powered cutting machine, available in manual push or self-propelled models. With up to 16.5 HP, it cuts asphalt and concrete quickly and cleanly-ideal for roads, runways, warehouse, and ground floors. Compared to track or wall saw, it requires no setup and operates in dependently. Cutting depth reaches up to 160mm, depending on the blade used.

Description

-Fully automatic drilling and return
-Motor stops automatically after return
-Easy charging in manual or automatic feed
-Light weight, high effeciency, small size
-Feeding speed will be adjusted automatically according to the load
-Double protected control panel

Description

AKODA GASOLINE POWER CUT OFF MACHINE 14” MODEL AK-PWC350 the right choice for the most demanding cutting requirements in construction and road building applications; fitted with powerful engines and state-of-the-art filtering devices in order to ensure trouble-free running even in dusty environments. reversible cutting arm for improved access. filtering system comprises 3-layer sponge filter, plus paper and nylon-mesh filters for unrivalled performance under all conditions. electronic speed governor on coil. cylinder with decompressor guarantees less stressful starting. silicone-coated starting cord prevents swelling caused by water, fuel tank protected against sparks and accidental knocks.