- SELECTED VERSION (Small Diamond Blade)
- DEMON SERIALS (Small Diamond Blade)
- BLACK SERIES (Small Diamond Blade)
- DIAMOND VACUUM BRAZED DISC (3"/4")
- UNIVERSAL DIAMOND BLADE (5''/6''/7''/9''/12")
- ASPHALT CUTTING BLADE (12"/14")
- WALK BEHIND SAW BLADE (16"/18"/20"/24"/26"/28")
- TUCK POINT/CRACK CHASER (4'',14'')
- GC STONE GRINDING DISC
- PLATING DIAMOND GRINDING & CUTTING DISC
- FLAP WHEEL FOR GLASS AND STONE
- CUP WHEEL (4"/5"/7"/9"/10")
- SPUN PILE LASER BLADE (7",9'',12'',14'',16")
- REINFORCE CONCRETE LASER BLADE (14'',16'')
- WALL SAW BLADE (600mm-1400mm)
- DIAMOND WIRE SAW
- NAIL CUTTING BLADE (4'',7'',9'')
- ALUMINIUM CUTTING BLADE (For Aluminium)
- WOOD CUTTING BLADE (For Wood)
- SDS PLUS 4 CUT DRILL BIT
- HSS STEP DRILL
- XTREME PLUS DRILL BIT
- SDS MAX DRILL BIT
- BULL POINT AND CHISEL
- DIAMOND STONE BIT
- TCT ANNULAR CUTTER
- DRY CORE BIT
- CORING MACHINES
- 1 PIECE TYPE CONSTRUCTION CORE BIT
- 3 PIECE TYPE CONSTRUCTION CORE BIT
- OPTIONAL ACCESSORIES
- 11" METAL CUTTING MACHINE
- 10" FLOOR GRINDING MACHINES (250mm)
- 14" TABLE TILE SAW (300/350mm)
- ENHANCED VERSION CONCRETE VIBRATOR
- PORTABLE VIBRATOR MOTOR
- WATER COLLECTOR (127MM)
- DEMOLITION HAMMER GREASE
- DUST COVER COMPLETE C/W WATER PUMP
- SINGLE RAIL TILE CUTTER
- POWER TROWEL 1000MM
- SURFACE FINISHING SCREED
- TAMPING RAMMER
- PLATE COMPACTOR 500MM
- FLOOR SAW MACHINE FS500
- AUTOMATIC MAGNETIC DRILL
- 14" POWER CUTTER
AKODA RESOURCES
SDN BHD
24, Jalan Sierra 5, Pusat Komersial Sierra Maharani, (Muar By Pass) 84000 Muar, Johor, Malaysia.
+6010-933 8550 (Mr Allen)
A14-LC350
| Previous | 1 / 2 | Next |
Description
Fresh Concrete also known as Young Concrete Or Green Concrete means the wet mix of concrete before being set. Concrete setting time is generally between 24 to 48 hours. Fresh Concrete takes about 28 days to achieve standard strength. AKODA ASPHALT BLADE is recommended for carrying the cutting works at this stage. Hardened Concrete is one which has reached its “final setting time” where concrete is fully cure and strong enough to carry out self-load and structural or service load. Hardened Concrete is so called the building material after 28 days where the construction work can be proceeded. AKODA REINFORCE CONCRETE LASER BLADE is recommended for carrying the cutting works at this stage.
